2 Kinds Of Material Handling Equipment

Posted on: 3 April 2019

In your warehouse, you are going to need to have ways to make sure that you can handle all the pallets that you keep your product and materials on. You could just have all the pallets sitting around and try to get your employees to move them manually, but there are all kinds of equipment that you can use in order to get your pallets moved around and put into the proper places. 

Pallet Jacks

A pallet jack is a basically a tool that has fork similar to a forklift so that it can slide into the spaces in the pallets. The handle will allow the user to pull the pallet around. The way that it works is that the user pushes the pallet jack under the pallet and then uses the handle like the handle of a jack for a car. That causes the pallet jack to lift up the pallet so that it isn't on the floor anymore and can be moved around without any stress on the user. One thing when it comes to pallet jack, it can generally only go so high, so you can't use it to put a pallet up on the second level of shelving. To do that, you are going to need to have something else. 

Forklifts

If you have to have pallets or other material up into higher levels, then you are going to need to have a forklift. The thing about forklifts is that there are all kinds of sizes. That means that you can find one that will work well for your warehouse. The smaller warehouse forklifts are usually electric so that you aren't worrying about exhaust coming into your warehouse. They are also small enough that they can get around your warehouse without knocking over the shelves or carrying too much of a risk of injury to your employees. You will still need to make sure that whoever is driving the forklift has the proper licensing, because you want to make sure that they know what they are doing. Even a small forklift is still heavy equipment and needs to be handled properly. 

If you have a warehouse, you need to make sure that you have the proper equipment to handle all your product and other materials. Material handling equipment like pallet jacks and forklifts can make it easier for you to do that and to make sure that you can get to what you need when you need it. 

Share  

CNC And Water Jet Fabrication: An Introduction

The first time I watched a water jet machine in operation, I was awestruck by the speed and precision with which it cut through the metal. That's when I knew I had to understand what made them work. I spent years researching and learning the basics of how CNC programming drove the machines, and the language that made the programming function. In my research, I learned that, while CNC was the most efficient means, it wasn't widely known. That's why I created this site. I hope to show others the value in CNC programming so that they can determine if it is right for their operation.

Categories

Latest Posts