Having Issues With Your Forklift Lighting And Delayed Controls? Consider Replacing The Forklift Battery

Posted on: 11 September 2020

If your forklift is something that you use at your business every day and you've noticed that its performance is diminishing, the problem may be the battery. Test the battery if you have a tester, or if not, you want to look at the function of your machine. 

There are a lot of signs that indicate that your battery has problems or that the issue could be mechanical. Do the following with the forklift to get to the bottom of the problem fast.

Determine If the Battery Is Bad

There are many signs that you can use to verify if the battery in your forklift is bad and needs to be replaced. A few of these indicators can be:

  • Extreme sulfation around the battery
  • Dim or malfunctioning lighting
  • Slow, reduced, or delayed performance 
  • Doesn't hold a charge at all or for an extended time

If you can see that there is corrosion or leaking around the battery, it needs to be replaced immediately, and you want to protect your hands to clean up any mess.

Invest in a High-Quality Replacement

When you are shopping for a new battery there are a few different things to consider. You can purchase the following:

  • Brand new battery from the manufacturer
  • Used battery with hours of life expectancy left
  • Refurbished battery that has been repaired

No matter what battery you decide on, be sure that it comes with some type of warranty. The brand-new battery should have at least a 5-7 year warranty offered with the purchase.

Your budget will greatly affect if you want to pay for a brand-new battery or if you think a used or refurbished forklift battery will work. Consider the age of the forklift, your budget, and how much you want to invest in this repair.

Do not let an important machine in your shop go without the care that it needs. Test the battery and consider replacing it so the forklift can run and perform at its highest ability. If the battery does not fix the problem, you want to have a mechanic come and look at the machine.

There could be other issues that are also related to the battery or work with the battery that need attention. The battery can be an affordable, easy, and fast fix for the problems that your staff members are experiencing while they are working throughout the day on the forklift. Contact a forklift parts supplier for more information.

Share  

CNC And Water Jet Fabrication: An Introduction

The first time I watched a water jet machine in operation, I was awestruck by the speed and precision with which it cut through the metal. That's when I knew I had to understand what made them work. I spent years researching and learning the basics of how CNC programming drove the machines, and the language that made the programming function. In my research, I learned that, while CNC was the most efficient means, it wasn't widely known. That's why I created this site. I hope to show others the value in CNC programming so that they can determine if it is right for their operation.

Categories

Latest Posts